Bowers & Wilkins 686 S2 Manuel du propriétaire télécharger pdf (Page 7)

ENGLISH

Ensure that the positive terminals on the speaker (marked + and

coloured red) are connected to the positive output terminal on the

amplier and the negative terminals on the speaker (marked – and

coloured black) are connected to the negative output terminal on

the amplier. Incorrect connection can result in poor imaging and

loss of bass.

Ask your dealer for advice when selecting speaker cable. Keep

its total impedance below the maximum recommended in the

speaker specication and use a low inductance cable to avoid

attenuation of high frequencies.

All connections should be made with the audio equipment

switched off.

There are 2 linked pairs of terminals on the back of the speaker.

For conventional connection (above left), the terminal links should

remain in place (as delivered) and just one pair of terminals

connected to the amplier. For bi-wire connection (above right),

the terminal links should be removed and each pair of terminals

connected to the amplier independently. Bi-wiring can improve

the resolution of low-level detail.

3. Connections

1 2 3 4 5 6 7 8 9 10 11 12 ... 58 59

Pas de commentaire

Bowers & Wilkins 686 S2 Manuel du propriétaire Page 7